This 12 Volt AC Power Supply will allow you to power your Fish Driver, Pipsqueak Driver, Classic Pipsqueak Driver, Large Strobing Driver, Low Frequency Driver, 4 Channel Variable Speed Sequencer, Cat09 10 Channel Sequencer, or Sound Activated Driver using wall current. No batteries required! For projects that require 200- 300 mA.

This unit is a power supply for driver max. It is a voltage-regulated computer power supply, providing 1.7 amps at 12v DC, with a 9v battery cap soldered on. Provides a sufficient amount of power to run our driver max. Note different unit than photo.

These connector are necessary for each individual segment of Led Rope Light.

This is the version used for connecting to 12 volt DC power (like a car battery).

Our friend Howard just supplied us with an amazingly detailed tutorial of how to work these LED Rope Lights into your dream project. Click here! http://www.timefold.com/ropelight/

Our Plug & Play Connector Extension is the no-soldering-required alternative to using lead wire in your project! Each36, 18, and6 inch length has a Driver Side Connector end on one side, and a Wire Side Connector end on the other. Use as many as you need, because like lead wire, they don’t count toward the maximum length rating of your driver! It’s perfect for adding length between your driver and your Cool Neon wire, and can also be used to link together different strands of Cool Neon wire in series.

Get them while you can, because it is likely when we’re out we will never be able to offer these units again. The new color or wire appears a foggy white when off, but when turned on it’s a bright ICE BLUE. This is a pure blue, not greenish or purplish hue. We call it ICE BLUE, but SKY BLUE would also describe it well as it is nearly the color of a sunny blue sky. The wire is much stiffer and plastic like than out normal Cool Neon wire, but it seems to be very durable resistant to kinking. and The driver has an on/off button and a switch for constant glow or blink and takes 2 AA batteries.

Our Plug & Play Connector Extension is the no-soldering-required alternative to using lead wire in your project! Each36, 18, and6 inch length has a Driver Side Connector end on one side, and a Wire Side Connector end on the other. Use as many as you need, because like lead wire, they don’t count toward the maximum length rating of your driver! It’s perfect for adding length between your driver and your Cool Neon wire, and can also be used to link together different strands of Cool Neon wire in series.

Tired of throwing all those batteries away?! This sleek 6 Volt Power Supply plugs into a wall socket and will power our Pocket Pack Driver, 3-Way Lightning and 3 & 5 Channel Pocket Sequencers using household current. No batteries are required.
Input: 120V 6W
60Hz

Output: 4.5V
500mA

Our Plug & Play Connector Extension is the no-soldering-required alternative to using lead wire in your project! Each length has a Driver Side Connector end on one side, and a Wire Side Connector end on the other. Use as many as you need, because like lead wire, they don’t count toward the maximum length rating of your driver! It’s perfect for adding length between your driver and your Cool Neon wire, and can also be used to link together different strands of Cool Neon wire in series.

Holds 8-AA batteries (these last much longer than one 9-volt battery). Creates 12-volts.

AC Adaptor for the Big Boy- 12vDC output at higher amperage than standard 12v Adaptor.

Replacement batteries for your Tiny Flashing Driver, Taxi Man Strobe Driver, Flickering amber LED candels, Steady Red LED candles, LED Name Badges & EClips! A pack of 10 CR2032 (3 Volt) batteries will keep you glowing for hours and hours!

Batteries- Pair of Panasonic 3 Volt CR 2032 for Tiny Flashing Driver. Also good for Flat Bracelets.

A bundle of 50 Driver side Plug & Play connectors. This Cool Neon connector is the one you solder onto your Cool Neon driver. The Wire Side connector is the one you solder onto your Cool Neon wire. These small 2-pin connectors are compatible with all our Plug & Play drivers and sequencers. They snap together with a friction lock, and have a 5 inch pig tail attached.

A bundle of 50 Wire Side Plug & Play connectors. This Cool Neon connector is the one you solder onto your Cool Neon wire. The ends are staggered,and pre-tinned for ease of soldering. The Driver Side connector is the one you solder onto your Cool Neon driver. These small 2 pin connectors are compatible with all our Plug & Play drivers and sequencers. They snap together with a friction lock, and have a 5 inch pig tail attached.

This harness plugs between your computer power supply and your hard drive, to easily provide 12volts to the fish driver, 9volt pipsqueak driver, or the low-frequency driver. Provides a solder-free, instant installation.

This Cool Neon connector is the one you solder onto your driver.

Our Plug & Play Y Connector allows a single driver to power two pieces of Cool Neon wire. A Y connector is included with every Plug and Play harness. Normally $1.50

Our Plug & Play Quad-Connector allows a single driver to power 4
pieces of Cool Neon wire, plug in another and you can now power 7
pieces of Cool Neon wire. Plug in 5 quad-connectors and make 16 wires
glow, plug in 50 Quad-connectors to make 160 wires glow, and so on, and
so on. They are compatible with all of our plug and play connectors: wire side
connectors, driver side connectors, extensions, and quad-connectors.

Quad connectors are super useful, you do not have to use all outputs. You don’t have at solder at all. And the lead wires in the Quad-connectors are out thinnest gauge found on any plug and play connector, cutting down on bulk even more!

This Cool Neon connector is the one you solder onto your Cool Neon wire.