Cool Neon Learn to Solder Kit
If this is your first time working with Cool Neon wire and are wondering where to begin, this kit is the perfect introduction! With our Cool Neon Learn to Solder Kit, you will learn how to solder up your own fabulous Cool Neon creations in no time! Everything that you will need to get started is included.
NOTE: Due to ongoing unavailability, the EZStrip EL wire strippers are no longer included with this kit. For wire strippers, we recommend the Klein Tools Katapult, available from Home Depot & other retail stores.
Includes:
1- Soldering Iron (#ASI)
1- 5 foot strand of Standard Cool Neon wire
4- 1 to 2 foot pieces of mixed Cool Neon wire, including a variety of:
Phat (3.2mm), Hella Phat (5mm) & Angel Hair (1.3mm)
1- Plug and Play 2AA Hand Held Driver(#DAAHH+1) (Will power up to 15 feet of Cool Neon wire)
1-Plug & Play AAA Driver (1DAAA) (Will power up to 3 feet)
1-Plug & Play Techno Flash Driver (1DTF) (Will power up to 3ft of Cool Neon wire)
1-Plug & Play AA Driver (1DAA) (Will power up to 5 feet of Cool Neon wire)
2- AA Batteries
4- AAA Batteries
5- Wire side connectors (#ACPPC-W)
2- Driver side connectors (#ACPPC-D)
2- “Y” Connector (#ACPPY)
Heat Shrink Tubing, a Razor Blade Solder & Copper Foil Tape for lots of practice solder joints!
Includes instructions on how to do a solder joint.
A $50.00 value for $35.00!
All Colors are Dealer’s Choice…